简体 繁体
您现在的位置: 首页 > 科技文摘 > 渔业装备 > 正文 渔业装备
自动操舵仪更换电罗经后的接口方法
作者:管理员    来源:渔机所    发布日期:2009-08-20 00:00    字体大小:【大】【中】【小】


林文革,张志强,赵宪勇
(中国水产科学研究院黄海水产研究所, 青岛 266071)
   

摘  要:为解决更换电罗经后AP-8A自动操舵仪的航向参考信号与新安装的NAVIGAT X MK-2型电罗经的接口匹配问题,在实践中设计了一种简单实用的接口改装方法。通过海上8个方位航行试验,航向跟踪迅速,灵敏度高,自动操舵仪工作正常。该思路和方法为解决其他类似昂贵设备老化后的更换改装问题提供了借鉴。

关键词:电罗经;自动操舵仪;接口改装

A method of interface for autopilot after gyrocompass renewed
LIN Wen-ge, ZHANG Zhi-qiang, ZHAO Xian-yong
( Yellow Sea Fisheries Research Institute, Chinese Academy of Fishery Sciences, Qingdao 266071, China )

Abstract: In order to resolve the match problem between the autopilot heading reference signal of AP-8A and the NAVIGAT X MK2 gyrocompass. A method was designed in practice to refit the interface, which is simple and useful. Through sea trial, tried the automatic steering on different headings and performed several major course changes, we found that the autopilot work well when the course was changed or maintained. This design need not to replace AP-8A autopilot and it is more economical. This design can be generalized.

Key words: gyrocompass; autopilot; interface refit

作者简介:林文革(1964—),男,工程师,主要从事船舶自动化与导航方面的管理与维修。E-mail: linwg@ysfri.ac.cn

(《渔业现代化》 2009,36(4),59-61)

 

打印本页

主办单位:中国水产科学研究院渔业机械仪器研究所(渔机所)

沪ICP备09044632号-1    沪公网安备 31011002002435号

网站保留所有权,未经许可不得复制,镜像