简体 繁体
您现在的位置: 首页 > 科技文摘 > 加工机械工程 > 正文 加工机械工程
乳清蛋白与凝胶化条件对鱼糜凝胶特性的影响
作者:罗永康(1964—),男,教授、博导,主要从事畜水产品贮藏加工与质量控制研究。E-mail:luoyongkang@263.net (来源:《渔业现代化》2011.38(3):35-38)    来源:渔机所    发布日期:2011-07-20 00:00    字体大小:【大】【中】【小】

石 径1,罗永康1,黄 辰1,吕元萌2,吴蒙蒙2
(1.中国农业大学食品科学与营养工程学院,北京 100083;
2.山东荣信水产食品集团股份有限公司,日照276800)

摘 要:研究了浓缩乳清蛋白(WPC)和凝胶化条件对白姑鱼鱼糜凝胶品质的影响,检测指标包括破断力、凹陷度、凝胶强度、白度和折曲性能。结果表明:白姑鱼鱼糜最适宜的凝胶化条件为40℃ 60 min。在40℃和50 ℃凝胶化60 min的条件下,添加的WPC在总蛋白中的蛋白比例为5%和10%时能够使白姑鱼鱼糜凝胶特性增强,并能保持和改善凝胶的弹性,抑制50℃下的凝胶劣化现象。但在30℃凝胶化60 min的条件下,WPC的添加反而会降低鱼糜的凝胶特性与弹性。添加10%的WPC能够显著(P<0.05)的提高白姑鱼鱼糜凝胶的白度。

关键词:白姑鱼鱼糜;浓缩乳清蛋白;凝胶特性;白度;折曲试验


Effects of Whey Protein Concentrate and Setting Conditions on the Gel Properties of Surimi
SHI Jing 1,LUO Yong-kang1,HUANG Chen1,LV Yuan-meng2,WU Meng-meng2
(1. College of Food Science﹠Nutritional Engineering, China Agricultural University, Beijing 100083, China;
2. SHANDONG RONGSENSE CO. , LTD, Rizhao 276800, China)

Abstract:Effects of whey protein concentrate (WPC) and setting conditions on gel properties of white croaker sumiri were investigated. The breaking force, breaking distance, gel strength, whiteness and bending properties were used as assay indicators. The results indicate that the optimum setting conditions were 40℃ for 60 min. Under the setting conditions of incubating at 40℃ and 50℃ for 60 min, when the protein ratio of WPC in the total protein was 5% and 10%, WPC increased the gel properties and elasticity, and also showed inhibitory activity against gel degradation of surimi at 50℃. While when the setting conditions were 30℃ for 60 min, the WPC addition decreased the gel properties and elasticity of surimi. WPC at 10% increased the whiteness of gels remarkably (P<0.05).

Key words:White croaker surimi; whey protein concentrate (WPC); gel properties; whiteness; bending experiment


基金项目:现代农业产业技术体系建设专项资金资助(CARS-46);国家自然科学基金(30871946);国家科技支撑计划(2008BAD94B06)
作者简介:石径(1988—),女,硕士研究生,主要从事水产品贮藏加工技术研究。E-mail:shijing0422@126.com
通讯作者:罗永康(1964—),男,教授、博导,主要从事畜水产品贮藏加工与质量控制研究。E-mail:luoyongkang@263.net

(来源:《渔业现代化》2011.38(3):35-38)
 

打印本页

主办单位:中国水产科学研究院渔业机械仪器研究所(渔机所)

沪ICP备09044632号-1    沪公网安备 31011002002435号

网站保留所有权,未经许可不得复制,镜像